Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of a Mazda CX 60

Model: Mazda CX-60 MK 1 - Years 2022-2026
Part: Door trim panel

Whether you need to clean it or perform a repair on the window lifter or other, the door panel, in this case the rear door, of the Mazda CX 60 may need to be removed. This video tutorial shows how to do it: start by unscrewing the two screws located in the handle covered by a small decorative plastic panel, then remove the single screw under the handle, extract the locking clips at the bottom of the panel, and finally, using a lever preferably made of plastic, pull the panel away from the door.

Posted on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Mazda CX 60
How to reset the service light on the Mazda CX 60
Mazda CX-60 (2022-2026 / MK 1) Thanks to the following guide addressed to all of you who own the new Mazda CX 60 (year 2025), you will be able to complete the service light reset p…
Activate, deactivate, and adjust the control radar settings on Mazda CX-60
Activate, deactivate, and adjust the control radar settings on Mazda CX-60
Mazda CX-60 (2022-2026 / MK 1) In this video, we will see how to activate, deactivate, and adjust MRCC (Adaptive Cruise Control) and CTS (Column Driving Assistant) on the Mazda CX-…
How to remove the front headlight from a Mazda CX60.
How to remove the front headlight from a Mazda CX60.
Mazda CX-60 (2022-2026 / MK 1) To remove the front headlight of the Mazda CX60, it is necessary to disassemble the front bumper to access the mounting bolts. Let's start by disconn…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos