Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Activate, deactivate, and adjust the control radar settings on Mazda CX-60

Model: Mazda CX-60 MK 1 - Years 2022-2026
Part: Onboard computer

In this video, we will see how to activate, deactivate, and adjust MRCC (Adaptive Cruise Control) and CTS (Column Driving Assistant) on the Mazda CX-60. The MRCC system not only maintains a set speed but also automatically adjusts the speed to maintain a safe distance from the vehicle in front. It is activated by pressing the MRCC button on the right side of the steering wheel; you reach the desired speed and set it by pressing the SET button. The icon that lights up on the dashboard will turn green and show the set speed. To change the speed, press the SET button briefly: you will change the speed +/- 1 km at a time. Pressing and holding it will change the speed by +/- 10 km at a time. To adjust the distance, find the button with a car and two bars on the sides and adjust the distance. The system temporarily deactivates by pressing the brake or CANCEL, and it resumes with the RESUME button. It can be completely deactivated by pressing the MRCC button again. The CTS button requires the MRCC button to be active, horizontal signage to be visible, and the speed to be below 150 km/h. Above 50 km/h, the system helps keep the vehicle in the lane; below 50 km/h, if the vehicle in front is detected, the vehicle can follow it even around curves, reducing the stress of column driving. If any of the required conditions cease, the system will deactivate automatically.

Posted on 25 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the 2025 Mazda CX 60
How to replace the cabin air filter of the 2025 Mazda CX 60
Mazda CX-60 (2022-2026 / MK 1) If you own the new Mazda CX 60 (year 2025) and are wondering how to replace the cabin air filter, then all you have to do is read the following guide…
How to Remove the Door Panel of a Mazda CX 60
How to Remove the Door Panel of a Mazda CX 60
Mazda CX-60 (2022-2026 / MK 1) Whether you need to clean it or perform a repair on the window lifter or other, the door panel, in this case the rear door, of the Mazda CX 60 may ne…
How to reset the service light on the Mazda CX 60
How to reset the service light on the Mazda CX 60
Mazda CX-60 (2022-2026 / MK 1) Thanks to the following guide addressed to all of you who own the new Mazda CX 60 (year 2025), you will be able to complete the service light reset p…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos