Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 6
    4. : How to reset the maintenance indicator on Mazda 6

Mazda 6 - Video tutorial

Model: Mazda 6 GH, MK 2 - Years 2008-2012
Part: Checks and maintenance
Operation: How to reset the maintenance indicator on Mazda 6

How to reset the maintenance indicator on Mazda 6? Very simple operation, we enter the car body, turn on the instrument panel with the appropriate key and press the button above the steering wheel (left side) of the car; scroll the menu above the display until you find the reset to be carried out. We confirm the reset with the left button (the message of reset will appear). Let's see on the display at how many km to set the new maintenance service. Always remember to make changes to the on-board computer when the vehicle is stopped and turned off. We turn off the instrument panel at the end of the setting.


Posted on 11 November 2023 by ScegliAuto



How to reset Mazda Mazda6 maintenance warning lights
Mazda 6 (2012-2023 / GJ, MK 3) The guide shows how to reset the services lights on the 2012 Mazda 6, without using any diagnostic devices. The procedure is performed directly from
How to restore the oil change on the Mazda 6.
Mazda 6 (2012-2023 / GJ, MK 3) In this video tutorial, we will show you how to reset the maintenance and oil change indicator on the 2020 Mazda 6. The procedure is very simple. Fir
How to reset the scheduled maintenance on a Mazda 6
Mazda 6 (2012-2023 / GJ, MK 3) In this video, we are shown how to reset the scheduled maintenance of a third generation Mazda 6. First, we turn on the vehicle's instrument panel wi

Other guides that may interest you

    Frequently Asked Questions

    • Mazda 6 2002-2008 - Where is the horn of the Mazda 6 located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos