Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Sensor on a Mazda CX-5

Model: Mazda CX-5 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part:

See other generations:
Video tutorial

Let's see how to reset the tyre pressure warning light on a Mazda CX-5: with a reliable pressure gauge, measure the tyre pressures and compare them with those indicated on the sticker located on the driver's door pillar. Now, we need to find the reset button for the TPMS; depending on the year and trim, it may be located in different places: on the dashboard to the left of the steering wheel; on the steering column or in the glove compartment.

The button has an icon of a tyre with an exclamation mark or is labelled as TPMS. Press and hold it for a few seconds until you hear a beep or see the light flash and then turn off. Now, just drive for 10-15 minutes at a speed above 15 mph to recalibrate the system.


Posted on 22 October 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on the Mazda CX-5?
How to Reset the Tyre Pressure Warning Light on the Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) Follow these steps to reset the low tyre pressure warning light on your vehicle: First, check the pressure of all four tyres and, if necessary, resto…
Checking and Storing Tyre Pressure on a Mazda CX5
Checking and Storing Tyre Pressure on a Mazda CX5
Mazda CX-5 (2017-2024 / MK 2) In this guide, learn how to check and store the tyre pressure on your Mazda CX5. First, check the correct pressure on the label located on the driver…
How to Reset the Tyre Warning Light on a Mazda CX-5
How to Reset the Tyre Warning Light on a Mazda CX-5
Mazda CX-5 (2012-2017 / KE, MK 1) To completely reset the tyre pressure warning light on your Mazda CX-5, the procedure is very simple and quick. Using the car's screen, access the se…

Other guides you may be interested in

How to Open the Bonnet of the Renault Kangoo

In this video, see how to open the bonnet of a Renault Kangoo and locate the windscreen washer fluid reservoir. The YouTuber had to go to a local garage to achieve this. He mentions going towards the passenger door, as this is a right-hand drive vehicle. Naturally, for left-hand drive vehicles, the door is that of the driver. Pull the lever located on the side towards you to release the bonnet. To open it, lever from the centre of the bonnet outwards, which is somewhat the opposite of how most bonnets open. In front of the driver, on the grille, there is a black rubber cap. Here you can add the washer fluid.

Watch the video!


by ScegliAuto

More videos