Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing Instrument Cluster Lights on Mazda 323

Model: Mazda 3 BK, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Instrument cluster

See other generations:
Video tutorial

Unscrew the screws that secure the instrument cluster, as shown in the video. Then, using a plastic lever or a small flat screwdriver, pry in the gap that runs the width of the instrument cluster between it and the dashboard.

Remove the cluster from its large housing. Now, from the back, you will have access to replace each connector and bulb.

The connectors can be detached by simply prying them off with a flat screwdriver. Once done, unscrew the affected bulb(s) and remove them, insert and screw in the new ones, and reassemble everything by reversing the procedure.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Reset the Inspection Light on a Mazda 3
How to Reset the Inspection Light on a Mazda 3
Mazda 3 (2013-2019 / BM, BN, MK 3) This short video tutorial shows how to reset the maintenance light on your Mazda 3. The procedure is very simple and takes less than 1 minute to comp…
How to Replace the Front Headlamp Bulbs on a Mazda 3
How to Replace the Front Headlamp Bulbs on a Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) Learn how to replace the front headlamp bulbs on a Mazda 3 with LED bulbs: open the bonnet (pull the lever located at the bottom right of the dashboa…
How to Replace the Rear Headlight Bulbs on a Mazda 3
How to Replace the Rear Headlight Bulbs on a Mazda 3
Mazda 3 (2009-2013 / BL, MK 2) Are the rear headlight bulbs blown? Here's how to change them. Open the boot and secure it. Remove the fabric panel covering the headlight (located a…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos