Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Outer Handle on Mazda 2

Model: Mazda 2 DE, MK 2, DH - Years 2007-2014
Part: Handle

Open the affected door and inspect the side (which can only be accessed with the door open). At the handle height, you will notice a small round screw cover: remove it with a plastic wedge or a small flat screwdriver. At this point, you can access the now exposed T20 torx bolt. Once unscrewed, you can pull out the lock cylinder and then remove the handle from its housing, which now has enough space. Proceed in reverse for the installation of the new handle. This is a very simple maintenance task.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing External Mirror Cover on Mazda 2
Removing External Mirror Cover on Mazda 2
Mazda 2 (2007-2014 / DE, MK 2, DH) Today, in this video tutorial, learn how to remove the external cover of the side mirror on a 2010 Mazda 2 in simple steps. First, carefully pry off …
How to disassemble the front door panel of the Mazda 2
How to disassemble the front door panel of the Mazda 2
Mazda 2 (2002-2007 / DY, MK 1) Today we will discover the instructions that will allow us to disassemble and remove the front door panel of the Mazda 2. First, we open the front do…
How to Remove the Cabin Pollen Filter on Mazda Mazda 2
How to Remove the Cabin Pollen Filter on Mazda Mazda 2
Mazda 2 (2007-2014 / DE, MK 2, DH) Follow these steps to remove the cabin pollen filter on Mazda Mazda 2: Open the glove compartment and pull down the drawer using a plastic lever (use…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos