Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Brake Pad Replacement

Model: Mazda 3 BK, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Brake pads

See other generations:
Video tutorial

Obtain original replacement brake pads, then lift the vehicle and secure it before removing the wheel. Unscrew the two retaining screws of the caliper with an Allen key and remove it by taking off the two retaining springs.

Check the wear condition of the retainers and the piston. Clean the entire braking assembly of any debris.

Lubricate the fixing pins and reposition the piston, ensuring it functions correctly. Fit the new pads, paying attention to the direction of rotation, and install the one with contacts facing inwards.

Carefully refit the caliper and springs. Reset the position of the pistons using a tool, then operate the brake pedal.

Ensure the pads are perfectly adhered to the disc. Recheck the brake fluid level.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Guide to Replacing Brake Pads
Guide to Replacing Brake Pads
Mazda 3 (2009-2013 / BL, MK 2) This guide explains step by step and simply how to replace the brake pads of your car, with a bit of patience, passion, and goodwill, without needing…
How to Replace the Rear Brake Discs and Pads
How to Replace the Rear Brake Discs and Pads
Mazda 3 (2003-2009 / BK, MK 1) Place the car on a ramp and lift it to a comfortable height for working. Remove the rear wheel. Take off the brake caliper retaining clip and unscrew…
Replacement of Rear Brake Pads
Replacement of Rear Brake Pads
Mazda 3 (2003-2009 / BK, MK 1) Lift the vehicle, remove the wheels, and secure it. Carefully detach the caliper by removing the two clips and unscrewing the rear bolts. Remove the …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos