Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery on a Mazda CX-30?

Model: Mazda Cx 30 MK 1, - Years 2019-2026
Part: Key

In this video tutorial, we can see how to replace the battery in the remote for the Mazda CX-30. To carry out the replacement, you will need a replacement battery model CR2032 and a small flathead screwdriver. Start by opening the rear cover using the small button located on the metal ring. Then, insert the screwdriver tip into the indicated slot and remove the lower metal part of the remote. Finally, remove the front cover with the Mazda logo to access the battery. Replace it while respecting the polarity and reassemble everything.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the remote control and access the battery of the Mazda CX-30
How to disassemble the remote control and access the battery of the Mazda CX-30
Mazda Cx 30 (2019-2026 / MK 1, ) Disassembling and replacing the battery of the key remote for the Mazda CX-30 is really very simple and does not require the use of special tools. Fi…
How to replace the battery of the Mazda CX-30 remote control?
How to replace the battery of the Mazda CX-30 remote control?
Mazda Cx 30 (2019-2026 / MK 1, ) In this tutorial we can see how to replace the battery of the Mazda CX-30 remote control, an extremely simple and quick operation. To do this, we wil…
How do you replace the battery of the Mazda CX-30 remote control?
How do you replace the battery of the Mazda CX-30 remote control?
Mazda Cx 30 (2019-2026 / MK 1, ) In order to replace the battery of the Mazda CX-30 remote control, you need to use an object to pry off the back panel of the device: once this panel…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos