Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Touch Up the Bodywork of a Mazda Bongo Brawny

Model: Mazda Bongo Brawny MK 5 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

As shown in the video, you will be painting a rusted part of the Mazda Bongo Brawny. You will need a wire brush on a drill to 'cut through the rust', a special material that converts rust back into steel, and zinc-based paint that acts as a waterproof layer against rust.

Use the wire brush to remove the rust layer and try to strip away the corroded paint. The video shows how a piece of bodywork is removed.

Apply the material to convert the remaining rust into steel. Let it sit for 24 hours, then apply the zinc paint twice.

To fill the hole, use two pieces of fiberglass and a sandable fiberglass repair paste. Finally, paint with automotive paint.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter of a Mazda Bongo Brawny
How to Replace the Engine Oil and Oil Filter of a Mazda Bongo Brawny
Mazda Bongo Brawny (1995-2005 / ) Let's see how to perform routine maintenance by replacing the engine oil and oil filter on a Mazda Bongo Brawny. First, lift the vehicle and start un…
Change the Engine Oil and Oil Filter on the Mazda Bongo Brawny
Change the Engine Oil and Oil Filter on the Mazda Bongo Brawny
Mazda Bongo Brawny (1995-2005 / ) This short and simple guide will show you how to perform routine maintenance by changing the engine oil and oil filter on the Mazda Bongo Brawny. Fir…
How to Change the Interior Dome Light Bulb to LED on the Mazda Bongo Brawny
How to Change the Interior Dome Light Bulb to LED on the Mazda Bongo Brawny
Mazda Bongo Brawny (2019-2026 / MK 5) Replace the interior light bulb of the Mazda Bongo Brawny with an LED. You will not replace the entire dome light, just the bulb - remember, never to…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos