Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD Port on the 2014 Mazda 6?

Model: Mazda 6 GJ, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

See other generations:
Video tutorial

If you want to connect a professional diagnostic tool to your third-generation Mazda 6 (2014), but do not know where the OBD port is located, read this mini guide carefully and follow the instructions. First, park the car safely and turn it off completely.

Then, shift your attention to the lower area of the dashboard and locate the OBD port just below the steering wheel. Once found, you can finally connect any compatible diagnostic tool and check for any electronic errors.


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How do you program the key for the Mazda 6?
How do you program the key for the Mazda 6?
Mazda 6 (2008-2012 / MK 2, GH) To program the key of the Mazda 6, you need to insert it into the ignition switch: while it is inserted, you must connect a diagnostic tool to the OB…
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Mazda 6 (2008-2012 / MK 2, GH) The cabin air filter is located on the passenger side, behind the glove compartment: open the glove box door and, by pressing on the sides, push in t…
How to Disable the Alarm on a Mazda 6
How to Disable the Alarm on a Mazda 6
Mazda 6 (2008-2012 / MK 2, GH) Here’s how to disable the alarm on a Mazda 6: in this case, the alarm was activating and deactivating without apparent reason, so the YouTuber decide…

Other guides you may be interested in

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos