Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

The procedure to replace the oil filter in a Mazda CX 5.

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: Oil filter

In this video tutorial, we will see the procedure for replacing the engine oil in a Mazda CX 5, following a few simple steps: The first thing to do is to get into the vehicle, turn off the car, and engage the handbrake. Lift the car using a hydraulic jack and place safety stands; using a screwdriver, remove the panel located under the engine. Once the panel under the engine is removed, we have access to the oil filter and the oil drain plug. We need to position a container to collect the used oil under the oil drain plug. Unscrew the drain plug using a Torx T 50 wrench. While waiting for all the oil to drain, unscrew the oil filter using a strap wrench; once the old filter is removed, replace it with the new one and also change the gasket, moistening it with new oil. Screw in the oil drain plug and the new oil filter (without exerting too much force). Using a funnel, we need to top up the new engine oil (SAE 0W-20); (keep an eye on the oil level using a dipstick).

Posted on 17 August 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace Mazda CX-5 engine oil and oil filter
How to replace Mazda CX-5 engine oil and oil filter
Mazda CX-5 (2012-2017 / MK 1, KE) Let's find out how to carry out the maintenance service of the oil change of the Mazda CX-5 first series, with 2.2 diesel engine. First we lift the c…
How to reset the service light on the Mazda CX-5
How to reset the service light on the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) In a few steps we will see how to reset the service light for the regular maintenance of the engine oil change of the Mazda CX-5; after replacing the…
Replacement of the license plate lights of the Mazda CX-5
Replacement of the license plate lights of the Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) In a few simple steps, we will see the process of disassembling and replacing the license plate bulbs of the Mazda CX-5. First, move to the rear of t…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos