Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel filter of the Mazda CX-5 2.0L.

Model: Mazda CX-5 KE, MK 1 - Years 2012-2017
Part: Diesel fuel filter

Let's briefly see the instructions necessary to disassemble and replace the diesel filter of the Mazda CX-5 2.0L. First, we open the rear doors and start disassembling and removing the small sofa, unscrewing the fixing screws that we find at the base; then we remove the fuel pump cover and disconnect the diesel pipes, as shown in the video. At this point, we disconnect the electrical connector and remove the fuel pump from the tank, so that we can later remove and replace the diesel filter, following the video tutorial until the end!

Posted on 21 September 2023 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the fuel filter for the Mazda CX-5.
Replacement of the fuel filter for the Mazda CX-5.
Mazda CX-5 (2017-2024 / MK 2) Today's guide will show us how to disassemble and replace the fuel filter of the Mazda CX-5, following the instructions below. First, we open the hoo…
How do you replace the fuel filter of the Mazda CX-5?
How do you replace the fuel filter of the Mazda CX-5?
Mazda CX-5 (2012-2017 / KE, MK 1) In order to replace the fuel filter of the Mazda CX-5, you must loosen the screws that secure the rear seat of the car, so that it can be completely …
How to replace the fuel filter in the Mazda CX-5?
How to replace the fuel filter in the Mazda CX-5?
Mazda CX-5 (2012-2017 / KE, MK 1) In this tutorial we can see how to replace the diesel filter in the Mazda CX-5, a very simple operation. First of all, make sure that the engine is c…

Other guides you may be interested in

How to Remove the Instrument Cluster on a Citroen Xsara Picasso

How to remove the instrument cluster located in the centre of the dashboard on a Citroen Xsara Picasso? Follow these steps to disassemble the parts: use a lever to remove the plastic covers of the instrument cluster. Unscrew the securing screws located at the sides of the instrument cluster with a screwdriver; after removing the screws, pull the piece out from the dashboard and disconnect the power cable located at the back of the instrument cluster. Fit the new piece or (replace the LEDs/bulbs in the cluster) and reassemble the same. Finally, reverse the assembly steps.

Watch the video!


by ScegliAuto

More videos