Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Chain on the Mazda CX-5

Model: Mazda CX-5 MK 1, KE - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Timing belt

See other generations:
Video tutorial

Today's main information will show you how and when to remove and replace the timing chain on the Mazda CX-5 2.2 Skyactive; the manufacturer states that the timing chain is full life and therefore should never be replaced (however, a visual inspection is recommended every 100,000 miles).

The video demonstrates the replacement of the timing chain, in this case with the engine removed; by removing the timing cover and cylinder head cover, you will be able to access the chain, taking the necessary references for the replacement!


Updated on 10 September 2026 by ScegliAuto


Related tutorials

Replacing the rear light of the Mazda CX-5
Replacing the rear light of the Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) Today's guide will show you how to remove and replace the rear light of the Mazda CX-5, following the instructions below. First, open the rear tailga…
How to Change Engine Oil in Mazda CX-5
How to Change Engine Oil in Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) Changing the engine oil and filter is undoubtedly one of the most common DIY tasks for motorists. For the Mazda CX-5, the process is the same as for …
Replacing the Serpentine Belt on Mazda CX-5 2.2 Skyactiv
Replacing the Serpentine Belt on Mazda CX-5 2.2 Skyactiv
Mazda CX-5 (2012-2017 / MK 1, KE) The instructions in this guide will allow you to remove and replace the serpentine belt on the Mazda CX-5 2.2 Skyactiv. First, lift the vehicle and s…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos