Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Air Intake Sensor

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Accessory kit

See other generations:
Video tutorial

Release and lift the bonnet to proceed with removing the upper engine cover by pulling it from the clips. Now disconnect the plugs connected to the sensors in the air intake pipes.

Next, remove the vacuum valves carefully to avoid spilling fluids. Unscrew the bolts that secure the sensors, allowing you to extract them and remove the old sensors to install the new ones.

Finally, retrace the steps described for reassembling the removed components, and you're done!


Updated on 24 February 2026 by ScegliAuto


Related tutorials

Mazda 6 (2008-2012 / MK 2, GH) Open the front bonnet and locate the engine air filter housing: it is situated at the front right (when facing the vehicle) just in front of the batt…
Mazda 6 (2002-2008 / GG, MK 1) To easily remove the protective cap of the bulb holder for the left front headlamp, it is necessary to remove the air filter container: first disconn…
Mazda 6 (2002-2008 / GG, MK 1) The cabin air filter is located on the passenger side, behind the glove compartment: open the glove compartment door, disengage the end stop cable, a…

Where are the fuses located in the Renault Megane 2?

The fuses in the Renault Megane 2 are divided within the specific fuse boxes installed in the vehicle: this model has two fuse boxes. The first is located inside the dashboard, at the bottom left of the steering column: this box contains the fuses for the window lifters, heated seats, courtesy lights, etc. The second fuse box is positioned on the right side of the engine bay and contains the fuses for the windscreen wipers, horn, etc.

Watch the video!


by ScegliAuto

More videos