Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : How to replace the battery of Mazda 3 keys

Mazda 3 - Video tutorial

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part: Key
Operation: How to replace the battery of Mazda 3 keys

As a first operation it will be necessary to push the tooth on the back to unlock the extraction of the metal key located inside the remote control, in this way you can pry, with a screwdriver, on the two recessed edges in order to initially divide the two parts of the key, now with a card you can continue splitting them until you can completely remove the back panel. Now you can also remove the battery cover and replace it with a new one, now you just have to retrace the steps backwards for reassembling the various pieces.


Posted on 25 September 2023 by ScegliAuto



How to replace the battery of the Mazda 3 key.
Mazda 3 (2013-2019 / MK 3, BN, BM) After several years of use, it may happen that the key of your 2019 Mazda 3 no longer works due to the battery being completely exhausted. Fortunatel
Mazda 3 battery replacement
Mazda 3 (2013-2019 / MK 3, BN, BM) Today we will see, in this video tutorial, how to disassemble and replace the Mazda 3 engine battery, in simple and quick steps. First of all we open
How to replace the Mazda 3 key battery
Mazda 3 (2013-2019 / MK 3, BN, BM) If your Mazda 3 key battery is completely exhausted but you don't know how to replace it then this guide is all you need. In fact, it will be enough

    Frequently Asked Questions

    • Mazda 3 2013-2019 - Why is the Mazda 3 key not detected? Read Answer
    • Mazda 3 2019-2026 - Why does the Mazda 3 Mk4 Keyless system no longer work? Read Answer
    • Mazda 3 2009-2013 - How to fix a door opening remote control failure on a 2005 Mazda 3 Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos