Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly and replacement of the cabin fan of the Mazda 3.

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part: Blower motor

Today we will see the instructions that will allow us to disassemble and replace the cabin fan of the Mazda 3. First, we get on board the car and start removing the glove box and all the side covers that we find at the bottom, to access the cabin fan; then we unscrew the fixing screws and disconnect the electrical connector to remove it, as shown in the video. At this point we replace and install the new original cabin fan, fixing it correctly; let's check its operation before reassembling the dashboard plastics!

Posted on 21 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the Cabin Heater Fan Motor
Replacement of the Cabin Heater Fan Motor
Mazda 3 (2003-2009 / MK 1, BK) To carry out this not-so-simple operation, you will need a few tools, including two cross-head screwdrivers, one of which should have a very short sh…
How to change the cabin air filter of a Mazda 3 2007.
How to change the cabin air filter of a Mazda 3 2007.
Mazda 3 (2003-2009 / MK 1, BK) Fortunately, replacing the cabin air filter in your 2007 Mazda 3 is one of the simplest operations to perform, even on your own, and thanks to the fo…
Disassembling the Fan Motor and Regulator of the Air Conditioning System
Disassembling the Fan Motor and Regulator of the Air Conditioning System
Mazda 3 (2003-2009 / MK 1, BK) If you have issues with the air conditioning system turning on and off by itself, first check the fuses both inside the cabin and in the engine compa…

How to Remove the Air Fan from a Nissan Juke

Learn how to remove the air fan from a Nissan Juke. Open the glove compartment and disconnect the end stop brackets, then unscrew the securing screws with a screwdriver. Unscrew the side screws in the glove compartment and remove the plastic door. Unscrew the screws again, and after disconnecting the power wires, pull the glove compartment out from the dashboard. Remove the fan after disconnecting the power wires. Clean the fan as necessary (disassemble the fan and its parts). Finally, reinstall the previously removed fan (new fan) and all its components under the glove compartment.

Watch the video!


by ScegliAuto

More videos