Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Mazda 3?

Model: Mazda 3 MK 3, BN, BM - Years 2013-2019
Part: Service warning light

The tire pressure warning light that appears on the instrument panel of the Mazda 3 can be reset by first inflating all the tires to the recommended inflation pressure indicated on the sticker attached to the door pillar. Once all the tires have been inflated to this pressure value, you can go inside the cabin and turn on the instrument panel. At this point, you will need to press and hold the button with the icon of the deflated tire warning light, which is located on the left side of the dashboard next to the steering wheel. After holding the button for a few seconds, the warning light will disappear.

Posted on 1 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Mazda 3?
How do you reset the Service light on the Mazda 3?
Mazda 3 (2013-2019 / MK 3, BN, BM) It will be possible to reset the Service indicator shown on the Mazda 3 instrument panel by holding down the TRIP button located in the top right of …
How to Reset the Service Light on a Mazda 3
How to Reset the Service Light on a Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) Today, we will explain how to reset the service light on a Mazda 3. To reset the light, you must first perform the service. After completing the serv…
How do you reset the Service light on the Mazda 3?
How do you reset the Service light on the Mazda 3?
Mazda 3 (2009-2013 / MK 2, BL) To make the Service light on the Mazda 3 disappear permanently, you need to turn on the instrument panel by turning the ignition key inside the corre…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos