Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulbs in the Mercedes GLC?

Model: Mercedes Glc C253, X253, MK 1 - Years 2015-2022
Part: Headlight bulb

In this tutorial we can see how to replace the front headlight bulbs in the Mercedes GLC, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then turn the wheel towards the inside of the side where we will be working, locate the small door located in the front area of the wheel arch and open it. Next, unscrew the circular cap, disconnect the power connector, release the metal clip and remove the old bulb. At this point, we can insert the replacement bulb and reassemble everything following the reverse procedure.

Posted on 13 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Mercedes GLC?
Where are the fuses located in the Mercedes GLC?
Mercedes Glc (2015-2022 / C253, X253, MK 1) On board the Mercedes GLC, the fuses are distributed inside the appropriate fuse boxes that are installed on the vehicle: in this type of car it will…
How do you adjust the brightness of the instrument panel of the Mercedes GLC?
How do you adjust the brightness of the instrument panel of the Mercedes GLC?
Mercedes Glc (2015-2022 / C253, X253, MK 1) In order to adjust the brightness of the instrument panel of the Mercedes GLC, first you need to turn on the instrument panel by inserting the igniti…
How to replace the rear lights of the Mercedes GLC
How to replace the rear lights of the Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) In this guide we will see the instructions that will allow us to disassemble and replace the rear lights and its bulbs of the Mercedes GLC. First, op…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos