Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel of a Mercedes A-Class

Model: Mercedes Classe A W168 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Door trim panel

See other generations:
Video tutorial

Remove the door panel of a Mercedes A-Class (driver's side). First, disconnect the battery terminals located in the engine compartment.

Use a lever or screwdriver to remove the cover caps on the handle and the panel, then unscrew the screws located in the slots with the screwdriver. Unscrew the remaining screws on the door panel and detach the retaining clips.

Disconnect the power connectors for the window regulator, the speaker in the handle, and the tension cable for the door release lever. Finally, grasp the panel with your hands and a lever, and pry it off the door.

Reassemble everything by reversing the steps.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of a Mercedes A-Class
How to Remove the Door Panel of a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. sit in the driver's seat of your Mercedes A-Class. Begin by prying off and removing the door inserts using a flathead screwdriver. Once done, unscrew.. …
How to Remove the Front Door Panel of a Mercedes A-Class
How to Remove the Front Door Panel of a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. remove the front door panel of your Mercedes A-Class. Using a thin but sturdy tool, start by prying and removing the inserts of the door panel. Once.. …
How to Remove the Left Front Door Panel of a Mercedes A-Class
How to Remove the Left Front Door Panel of a Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) Begin by disconnecting the battery terminals located in the engine compartment. Using a screwdriver, remove the screws in the handle (take off the pl…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos