Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Reinstalling the Instrument Cluster

Model: Mercedes Classe S MK 3, W140 - Years 1991-1998
Part: Instrument cluster

Removing the instrument cluster is a fairly easy task as it is simply clipped in place: in this case, you need to create a hook-like tool using steel wire (bend the end at a 90° angle for about 0.2 in and file it to flatten the tip). It is recommended to position the steering wheel with the adjustment all the way down and out to facilitate the removal of the instrument cluster. The clips are located on both lateral ends: simply insert the tool, rotate it to hook the tip onto the back of the cluster, and pull to release it, first from one side and then from the other. Once removed, disconnect the two connectors attached: press the lock and rotate the bayonet to extract the connector. Once the repair is done, reconnect the connectors and insert the instrument cluster back into its place: just press to snap it back in.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing Navigation Display
Instructions for Removing Navigation Display
Mercedes Classe S (2005-2013 / W221, MK 5) To remove the navigation display, first remove the plastic trim that covers the entire dashboard: start by prying off the upper edge using a plastic …
How to Remove Instrument Cluster on Mercedes C
How to Remove Instrument Cluster on Mercedes C
Mercedes Classe S (1999-2005 / MK 4, W220) Let's see how to remove the instrument cluster on a Mercedes S. Use the instrument cluster removal keys: unlock and pull the piece outward. Remove th…
How to Remove and Replace the Cabin Air Filter
How to Remove and Replace the Cabin Air Filter
Mercedes Classe S (1999-2005 / MK 4, W220) Watch this video to learn how to replace the cabin air filters. The car in question has filters both under and behind the glove compartment on the pa…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos