Do it yourself
| ||||
|
Mercedes Classe S - Video tutorial
Model: Mercedes Classe S
MK 4, W220
- Years 1999-2005 Follow this video to learn how to replace the cabin air filters. The car in question has filters both under and behind the passenger side glovebox and this video will show you how to replace those under the drawer. Begin by partially removing the carpet from under the passenger side dashboard. Remove the polystyrene panel and the plastic panel under the drawer that is lower down towards the engine. As you can see there are two filters. Slide the first clip to the right and the second to the left to remove the covers. Pull out both filters. The filter material may look different but they are still compatible. Instead, note the shape of each of the filters which is different and therefore cannot be exchanged when reassembling them. During disassembly and reassembly, always carefully observe the position of the arrow on the filter, which indicates the direction of the air flow. Insert the filters, replace the covers and lock them by sliding the clip. Reassemble the panel making sure that it is well hooked, reposition the polystyrene panel and finally the footboard. Car Model: Mercedes Benz S-Class Year: 2005
Posted on 28 July 2023 by ScegliAuto
Cabin air filter removal
Mercedes Classe S (1999-2005 / MK 4, W220) Replacing the cabin air filter is an operation that all motorists should pay attention to. Their function is to keep the air clean inside the passeng
Cabin air filter replacement
Mercedes Classe S (1999-2005 / MK 4, W220) The cabin air filter is located on the passenger side immediately behind the glovebox which must therefore be removed. Open the door of the glovebox
How to remove the filter from the Mercedes S550 Class dashboard
Mercedes Classe S (2005-2013 / MK 5, W221) Let's see how to remove the cabin filter on a Mercedes S-Class? Let's see the disassembly of the parts attached to the cabin air filter. The cabin fi Other guides that may interest you
|
How to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.097
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |