Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe B
    4. : How to replace rear light bulbs on Mercedes B

Mercedes Classe B - Video tutorial

Model: Mercedes Classe B MK 1, W245 - Years 2005-2011
Part: Rear light bulb
Operation: How to replace rear light bulbs on Mercedes B

The tail lights of your Mercedes B-Class no longer work? Let's see in this video how to replace the rear light bulbs: we open the boot of the luggage compartment, we go to remove the screw caps of the covering with a screwdriver. Unscrew the torx tightening screws and remove the plastic from the glove compartment cover, let's get ready to remove the plastic inspection cap. We detach the lamp holders from the headlight, replace the damaged bulbs with new ones (voltage and size equal to the original). Finally we go to reassemble the lighthouse and proceed backwards in the assembly of the other pieces.


Posted on 17 October 2023 by ScegliAuto



Disassembly of the rear headlight and bulbs of the Mercedes Classe B.
Mercedes Classe B (2005-2011 / MK 1, W245) In this short and simple guide, we will see how to disassemble and replace the rear light and its bulbs of the Mercedes Classe B. First of all, open
Disassembly and replacement of the rear headlight bulbs of the Mercedes B-Class.
Mercedes Classe B (2005-2011 / MK 1, W245) In this video tutorial, we will see how to disassemble and replace the bulbs of the rear headlight of the Mercedes B-Class, following these simple st
Replacement of the brake light bulb for the Mercedes B-Class.
Mercedes Classe B (2005-2011 / MK 1, W245) Below we will see the instructions that will allow us to disassemble and replace the rear stop light bulb of the Mercedes Classe B. First, we open th

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos