Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Mercedes A-Class

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Timing belt

See other generations:
Video tutorial

How to replace the timing belt on a Mercedes A-Class. Open the hood and secure it with the prop rod. Remove the air box (if you have space issues), disconnect the power wiring with pliers, and remove the plastic soundproofing panel with a screwdriver.

Lift the car with a column lift to access the underside (if necessary). Use a wrench to loosen the tensioner pulley and slide the belt off. Use a socket wrench to remove the tensioner pulley securing bolt and remove the water pump.

Install the new water pump, tensioner, and belt, and tighten everything with the socket wrench.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on a Mercedes A-Class
Replacing the Timing Belt on a Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) .. and replace the timing belt on a Mercedes A-Class. First, lift the vehicle and start by removing the front right wheel; then remove the crankshaft.. …
Guide to Replacing the Timing Belt on the Mercedes A-Class
Guide to Replacing the Timing Belt on the Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) .. and replacing the timing belt on the Mercedes A-Class. First, open the hood of the vehicle and start by removing the engine mount. Then, raise the vehicle.. …
How and When to Change the Timing Belt on the Mercedes A-Class 1.5 CDI
How and When to Change the Timing Belt on the Mercedes A-Class 1.5 CDI
Mercedes Classe A (2012-2018 / W176) .. how to replace the timing belt on the Mercedes A-Class 1.5 CDI. The manufacturer recommends replacing the belt every 5 years or 100,000 miles for the.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos