|
Do it yourself
| |||
| ||||
How to remove the starter motor of the Mercedes C-Class
Model: Mercedes Classe C
W203
- Years:
2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Video tutorial
Today we will explain how to remove the starter motor on a Mercedes C-Class model W 203. Before replacing the starter motor, we need to open the front hood of the vehicle and disconnect the battery to avoid a short circuit due to power interruption. After disconnecting the battery, lift the vehicle on a scaffold or use jack stands and a jack. Remove the lower engine cover and using a 13mm wrench, remove the motor shaft to have more space for the removal of the starter motor, which must be unscrewed using an 11mm wrench. Disconnect the connector and the power wire and then extract the starter motor from its seat. After removing the starter motor, we can proceed with the replacement of the part or with cleaning the brushes.
Posted on 25 February 2025 by ScegliAuto
Related tutorials
Mercedes Classe C
(2000-2007 /
W203)
.. you begin, open the hood of your Mercedes C-Class. Start by removing all the hoses and intake manifolds located above the starter motor, loosening.. …
Mercedes Classe C
(2007-2013 /
W204)
.. To replace the starter motor on a Mercedes C-Class, open the hood to access the components in the engine compartment. The starter motor is located.. …
Mercedes Classe C
(2000-2007 /
W203)
.. and replace the starter motor on a Mercedes C-Class 220 CDI. First, lift the vehicle and locate the starter motor. Using a socket wrench, remove its.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Where is the battery located on the Aprilia Scarabeo 250ie scooter?
This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.231
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |