Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. CLA
    4. : How to remove the door panel on Mercedes Classe Cla

Mercedes CLA - Video tutorial

Model: Mercedes CLA X117, C117 - Years 2013-2019
Part: Door panel
Operation: How to remove the door panel on Mercedes Classe Cla

Let's see how to remove the door panel of a Mercedes Cla-Class? Before starting the disassembly work, let's disconnect the battery terminals in the luggage compartment. Let's start the disassembly: we remove the plastic placed under the handle with a lever, then, with a screwdriver (with inserts) we go to unscrew the tightening screws placed in the plastic handle. Once the screws on the panel have been removed, with the lever we remove all the plastic clips that block the door. We detach the door panel with our hands, unhook any power supply terminals and release cable.


Posted on 22 October 2023 by ScegliAuto



How do you remove the door panel of the Mercedes CLA?
Mercedes CLA (2013-2019 / X117, C117) In order to remove the door panel of the Mercedes CLA, you need to use a tool to pry off the chrome trim along the door handle: once this trim is rem
What to do in case of a fuel door lock in a Mercedes CLA?
Mercedes CLA (2013-2019 / X117, C117) In the Mercedes CLA, it can happen that the fuel door remains locked, for example due to a malfunction in the actuator or the control button. In any
How to open the fuel door that is locked in the Mercedes CLA?
Mercedes CLA (2019-2024 / C118, X118) In the Mercedes CLA, it can happen that the fuel door gets stuck, for example due to a problem with the control button or the lock actuator. In this

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos