|
Do it yourself
| |||
| ||||
How to reset the service indicator light on the Mercedes C-Class
Model: Mercedes Classe C
W203
- Years:
2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Video tutorial
Today's instructions will show us how to reset the maintenance service light for the regular oil change of the Mercedes C-Class. First, we get on board the car and start the instrument panel; then we navigate to the service option using the arrow buttons on the steering wheel, pressing and holding the reset button until the maintenance key is reset (thus resetting the kilometers to the next service), as shown in the video. Finally, we turn off the instrument panel and start the engine!
Posted on 3 May 2025 by ScegliAuto
Related tutorials
Mercedes Classe C
(2014-2021 /
W205)
.. to the car maintenance on a 2019 Mercedes C-Class vehicle, we need to turn on the instrument panel and simultaneously press the "OK" and "CALL" buttons.. …
Mercedes Classe C
(2007-2013 /
W204)
.. tire pressure warning light on the Mercedes C-Class. Before recalibrating the TPMS sensors, ensure that all four tires are at the proper operating.. …
Mercedes Classe C
(2007-2013 /
W204)
.. reset the tire pressure light in the Mercedes C-Class, an extremely simple and quick operation, to be carried out only once the correct pressure of each.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to adjust the headlights in the Toyota RAV4?
In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.094
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |