|
Do it yourself
| |||
| ||||
How to replace the airbag in the Mercedes C-Class
Model: Mercedes Classe C
W203
- Years:
2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Video tutorial
When the airbag warning light on the instrument panel comes on, it is very likely that there is a defect in the airbag and it needs to be replaced. To replace the airbag on a Mercedes C-Class car, we need to use a long flat tip screwdriver or a key. Insert the screwdriver into the lower hole on the right side of the steering wheel and perform the same operation on the left side hole, trying to move the lever that locks the central body. Then remove the central body and disconnect the connector. After completing this operation, we can proceed with inserting the new airbag and central body. Once the airbag is removed, it is also possible to remove the steering wheel to check that everything is in order; to do this, we need to unscrew the central nut with a torque wrench and then remove the steering wheel.
Posted on 6 June 2025 by ScegliAuto
Related tutorials
Mercedes Classe C
(2000-2007 /
W203)
.. To disable the passenger airbag in a Mercedes C-Class, locate the airbag connector under the seat: this connector must be disconnected, and an emulator.. …
Mercedes Classe C
(2014-2021 /
W205)
.. To remove the airbag from the Mercedes C-Class, loosen the screws that secure the airbag to the center of the steering wheel: these screws are.. …
Mercedes Classe C
(2014-2021 /
W205)
.. airbag system and control unit of the Mercedes C-Class work. The front passenger airbag is automatically activated based on the presence of the passenger,.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?
To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.124
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |