Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster on Mercedes CLK 200

Model: Mercedes Clk A208, C208, W208 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Instrument cluster

See other generations:
Video tutorial

How do you remove the instrument cluster on a Mercedes CLK 200? Follow these steps for proper disassembly: Remove the plastic trim around the instrument cluster (if present) and detach it from the dashboard, then remove the trim above the steering wheel.

Use special removal tools (as shown in the video) to take out the cluster: insert them into the holes beneath the instrument panel, then pull the piece towards you. After detaching the instrument cluster, pull it away from the dashboard and disconnect the power cable.

Install a new piece or replace the LEDs/bulbs in the cluster and refit the original. Finally, reverse the assembly steps.


Updated on 4 March 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Mercedes CLK 200
How to Reset the Service Light on a Mercedes CLK 200
Mercedes Clk (1997-2003 / A208, C208, W208) To reset the service light on a Mercedes CLK 200, follow these steps: turn the key to switch on the ignition (do not start the engine). Locate the "u…
How to Remove the Instrument Cluster on a Mercedes CLK
How to Remove the Instrument Cluster on a Mercedes CLK
Mercedes Clk (2002-2010 / A209, C209, W209) Want to remove the instrument cluster from a Mercedes CLK? Here’s how to take the instrument panel out from the dashboard. Use a lever to remove the …
Removing the Instrument Cluster on Mercedes CLK
Removing the Instrument Cluster on Mercedes CLK
Mercedes Clk (2002-2010 / A209, C209, W209) Want to remove the instrument cluster from a Mercedes CLK? Here's how to take out the piece from the Mercedes dashboard. Use hook levers to detach an…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos