Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the Service indicator light on the Mercedes C-Class?

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Service warning light

See other generations:
Video tutorial

On the instrument panel of the Mercedes C-Class, the Service light that is shown can be reset by turning on the instrument panel, so that it is possible to access the options in the menu: you will need to navigate using the buttons on the steering wheel, so that the maintenance light is identified.

When this is displayed on the screen, you will need to press and hold the button on the left side of the panel: this will allow you to proceed and reset the light correctly.

Turning off and on the instrument panel will allow you to verify that the reset has been completed.


Posted on 7 August 2025 by ScegliAuto


Related tutorials

Mercedes Classe C (2014-2021 / W205) ..o reset the "Service" light on our Mercedes C-Class. Start by sitting in the driver’s seat, then turn on the ignition by pressing the start button. Nex.. …
Mercedes Classe C (1993-2000 / W202) .. on the instrument panel of the Mercedes C-Class by holding down the ZERO button located on the left side of the instrument panel: you will need.. …
Mercedes Classe C (2007-2013 / W204) .. on the instrument panel of the Mercedes C-Class by turning the ignition key to turn on the instrument panel and then holding down the OK and call.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos