|
Do it yourself
| |||
| ||||
Reset of the service on a Mercedes C-Class W203
Model: Mercedes Classe C
W203
- Years:
2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Video tutorial
Today we will see how to reset the service on a Mercedes C-Class w203. Let's start the procedure by turning on the vehicle's instrument panel without starting the engine. Then, we begin pressing the upper arrow button, located on the right side of the steering wheel, until we reach the screen showing the service interval. After that, we press and hold the reset button, located on the left side of the speedometer, for about five seconds until the reset request appears on the screen. Then, we release the button and press it again for three seconds to perform the reset and complete the job.
Posted on 22 August 2025 by ScegliAuto
Related tutorials
Mercedes Classe C
(2000-2007 /
W203)
.. on the instrument cluster of your Mercedes C-Class W203 is really simple, and with the following procedure, you can complete the operation without.. …
Mercedes Classe C
(2000-2007 /
W203)
Resetting the service light on a Mercedes C-Class, model W203, is a simple and quick operation. To reset the light, do the following: - Turn on the i…
Mercedes Classe C
(2000-2007 /
W203)
.. The instrument cluster of the Mercedes C-Class W203 displays a warning when it's time to change the engine oil. After completing this important.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to adjust the headlights in the Toyota RAV4?
In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.028
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |