|
Do it yourself
| |||
| ||||
How do you reset the Service light on the Mercedes C-Class?
Model: Mercedes Classe C
W204
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
It will be possible to completely make the Service light disappear from the instrument panel of the Mercedes C-Class by navigating through the menu that will appear on the instrument panel using the buttons on the left side of the steering wheel. When the voice with the remaining kilometers to the next maintenance is identified, you will need to hold down the buttons located at the bottom on the left side and the one at the top on the right side. In this way, the Service light will be completely reset and it will be possible to turn off the instrument panel by turning the key. It will also be possible to verify that the reset has occurred correctly by activating the instrument panel again.
Posted on 28 September 2025 by ScegliAuto
Related tutorials
Mercedes Classe C
(2000-2007 /
W203)
.. To reset the Service light on the Mercedes C-Class, turn on the ignition by turning the key in the ignition switch. Once the instrument panel is on,.. …
Mercedes Classe C
(2007-2013 /
W204)
.. The service light on a Mercedes-Benz C-Class vehicle turns on when it is time to perform the required maintenance service. Basic maintenance.. …
Mercedes Classe C
(2007-2013 /
W204)
.. the "Service" light on your Mercedes-Benz C-Class. Start by turning on the vehicle and checking that the "Service" indicator is visible on the display... …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to adjust the headlights in the Toyota RAV4?
In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.084
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |