Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the battery for the Mercedes A-Class 220d.

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

Let's see the instructions on how to disassemble and replace the battery of the Mercedes A-Class 220d. First, we open the hood of the vehicle and start by removing the plastic cover of the battery located at the top right of the engine compartment; then, we disconnect both battery terminals (positive and negative), unscrewing the bracket screw to remove it from its housing, as shown in the video.

At this point, we install the new battery, of the correct type and with the same amperage; we insert it in the correct direction and make the connections, finally checking the ignition of the engine.


Posted on 19 December 2025 by ScegliAuto


Related tutorials

How to Replace the Battery in a Mercedes A-Class
How to Replace the Battery in a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) Before you begin, open the hood of your Mercedes A-Class. Start by removing the upper battery cover. Next, loosen the bolts securing the two terminal…
How to Replace the Battery in the Mercedes A-Class?
How to Replace the Battery in the Mercedes A-Class?
Mercedes Classe A (2004-2012 / W169) To replace the battery in the Mercedes A-Class, loosen the screws that secure the protective panel in the passenger footwell. Once this panel is remo…
Instructions for Replacing the Battery in a Mercedes A-Class
Instructions for Replacing the Battery in a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) In this video tutorial, you will see instructions on how to remove and replace the battery in a first-generation Mercedes A-Class. The battery is loc…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos