Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the internal door handle of the Mercedes C-Class.

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Handle

The instructions below will allow us to disassemble and replace the internal door handle of the front door of the Mercedes Class C. First, let's open the front door of the car and start disassembling and removing the front door panel by unscrewing all the fastening screws; then we disconnect the electrical connector of the window switch. At this point, we unscrew the screws of the handle, disconnecting the cable to remove it; let's replace it with the new original one, securing it to the panel and then reassembling the covering on the front door!

Posted on 17 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Inner Panel
How to Remove the Front Door Inner Panel
Mercedes Classe C (2000-2007 / W203) The tools needed to remove the door panel are just a few screwdrivers, like those shown at the beginning of the video, and possibly a flashlight. The…
How to open the engine hood on Mercedes C-Class
How to open the engine hood on Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. Let's see how to open the bonnet on a Mercedes C-Class. We open the door (driver's side) and pull the lever located at the bottom left of the dashboard,.. …
How to open the hood of the Mercedes C-Class
How to open the hood of the Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) .. access the engine compartment of the Mercedes C-Class. First, we open the front door on the driver's side and start pulling the plastic lever that we.. …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos