Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Windshield Wiper Blades on a Mercedes CLA

Model: Mercedes CLA C117, X117 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Windshield wipers

See other generations:
Video tutorial

When you notice that the windshield is not completely clean but has streaks while using the wiper blades, it means it's time to replace the wipers. In the video provided, you can see how to perform this task, which can be done by anyone in a short amount of time.

Raise one wiper at a time, press the release buttons on the sides, and push upward to remove them from the mount. After removing the worn blades, to install the new ones, do the reverse: slide them into the mounts and push until they click into place.


Posted on 8 February 2026 by ScegliAuto


Related tutorials

Mercedes CLA (2013-2019 / C117, X117) To replace the windshield wiper blades on a Mercedes CLA, lift the arm so that the blade to be replaced does not touch the windshield. Next, disconne…
Mercedes CLA (2019-2025 / C118, X118) To replace the windshield wiper blades of a Mercedes CLA, start by putting the wipers in service position. Turn on the instrument panel without start…
Mercedes CLA (2013-2019 / C117, X117) To replace the battery in a Mercedes CLA, open the hood to access the components inside the engine compartment. Here, in the upper right area, you wi…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos