Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Turn Signal Switch on a Mercedes E-Class

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Checks and maintenance

How to remove the turn signal switch on a Mercedes E-Class? Let's see how to proceed with the disassembly. Before removing the car's steering wheel, disconnect the battery power cables. Remove the steering wheel trim pieces using a screwdriver and appropriate bit, then, remove the airbag by unscrewing the screws present. Once the airbag is removed: disconnect the power connectors, then unscrew the central steering wheel bolt and disconnect the power connectors for the airbag and buttons. Pull the steering wheel off by hand after marking the tightening position with a marker. After removing the steering wheel, extract the turn signal switch from the steering column. Replace the turn signal switch and reassemble the parts.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe E (2009-2016 / W212) .. to replace the light switch of the Mercedes E-Class, you need to open the driver's door so that you can detach the side panel of the dashboard located.. …
Mercedes Classe E (2002-2009 / W211) .. replace the stop light switch of the Mercedes E-Class. First, let's get inside the vehicle on the driver's side and start by removing the plastic cover.. …
Mercedes Classe E (2002-2009 / W211) .. remove the turn signal switch from a Mercedes E-Class 320 W211, third series. First, get inside the vehicle and remove the plastic trim around the turn.. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos