Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD Port of the Mercedes Vito?

Model: Mercedes Vito MK 3, W447 - Years 2014-2024

The diagnostic port or OBD port inside the Mercedes Vito is located under the dashboard on the driver's side. To access the port, you need to remove its cover. As shown in the video tutorial, press on the sides of the cover to remove it and use the port to connect the vehicle to the diagnostic computer. Using the diagnostic port is essential for vehicle diagnosis, especially when the fault is not visible to the naked eye, such as when a sensor is the cause. In addition to searching for faults, the diagnostic port can also be used to reset some warning lights using specific programs and entering the vehicle data.

Posted on 13 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Where is the OBD port located in the Mercedes Vito?
Where is the OBD port located in the Mercedes Vito?
Mercedes Vito (2003-2013 / W639, MK 2) The OBD port of the Mercedes Vito vehicle is located inside the cabin, specifically under the dashboard near the pedals. Unlike other vehicles, the p…
Where is the OBD port located on the Mercedes Vito?
Where is the OBD port located on the Mercedes Vito?
Mercedes Vito (2003-2013 / W639, MK 2) The Mercedes Vito model w639 vehicles have an OBD port located inside the cabin, specifically under the dashboard on the driver's side just above the…
Where is the OBD port located in the Mercedes Vito W639?
Where is the OBD port located in the Mercedes Vito W639?
Mercedes Vito (2003-2013 / W639, MK 2) Below, we will discover where the OBD port is located inside your Mercedes Vito W639 (2003-2013). This is a very important port that allows you to ea…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos