Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Mercedes C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on a Mercedes C-Class, get in the vehicle and turn on the ignition without starting the engine. Use the buttons on the steering wheel to display the total odometer reading on the central display.

Next, press the call answer button and the "OK" button simultaneously for a few seconds until the workshop menu opens. Using the steering wheel controls, enter the "ASSYST PLUS" or maintenance section and select the option related to the service.

Then choose the reset option or "Full Service" and confirm the operation by following the instructions shown on the display. Once the reset is complete, turn off and turn on the ignition again to verify that the maintenance light has been cleared correctly.


Posted on 20 May 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2000-2007 / W203) .. regular oil change maintenance on a Mercedes C-Class W203. First, get inside the car and turn on the ignition; then press the button located at the.. …
Mercedes Classe C (2000-2007 / W203) .. to reset the service light on a Mercedes-Benz C-Class in the W203 version: first, get in the car and close all four doors. Then, insert the key into.. …
Mercedes Classe C (2014-2021 / W205) .. regular maintenance oil change on a Mercedes C-Class. First, get in the vehicle and turn on the ignition; then go to the onboard computer menu and select.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos