Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Right Panel of a Mercedes C-Class

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Door trim panel

See other generations:
Video tutorial

Let's see how to remove the door panel (front right) of a Mercedes C-Class. Disconnect the battery terminals located in the engine compartment.

Use a screwdriver to remove the screws in the handle after removing the screw covers and the handle cover. Remove the trim plastic at the corner of the window.

Unscrew the remaining screws on the door panel and detach the retaining clips. Remove the panel and disconnect it from the door by unplugging the power harness and the opening cable.

Perform the desired maintenance inside the door.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

How to Remove the Right Front Door Panel on a Mercedes C-Class
How to Remove the Right Front Door Panel on a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. the right front door panel on a Mercedes C-Class: Disconnect the battery terminals. Using a screwdriver, remove the screws located in the upper.. …
How to Remove the Rear Door Panel of a Mercedes C-Class
How to Remove the Rear Door Panel of a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. can start, open the rear door of your Mercedes C-Class. Begin by unscrewing and removing all the screws that secure the rear door panel to the door itself... …
Where is the fuse box of a Mercedes C-Class located?
Where is the fuse box of a Mercedes C-Class located?
Mercedes Classe C (2007-2013 / W204) .. The fuse box of a Mercedes C-Class is located in the trunk. To access it, open the trunk and remove the lining or access panel located.. …

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos