Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seat of the A-Class

Model: Mercedes Classe A W168 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Seat

See other generations:
This video is currently unavailable

To remove the rear seats of the A-Class, follow these steps. Open the rear door, and on the lower side of the seat cushion, there is a lever; activate it to fold down the backrest.

Now you can recline the seat with the backrest down using the lever located at the bottom and side of the seat; pull it and move the entire seat vertically and forward. After doing this, pull the handle located under the seat to detach the pins that hold it to the vehicle's floor.

Perform the same operation for the seat on the opposite side. For reinstallation, reverse the steps you took earlier.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headrest of a Mercedes A-Class
How to Remove the Front Headrest of a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. how to remove the front headrest of a Mercedes A-Class. This video explains how to proceed. First, open the door and enter the back of the car (rear passenger.. …
How to Install the Battery in a Mercedes A-Class 180 and Where to Find It
How to Install the Battery in a Mercedes A-Class 180 and Where to Find It
Mercedes Classe A (2004-2012 / W169) .. how to change the battery in a Mercedes A-Class 180 CDI. The battery is located under the passenger seat; as the first step, push the seat all.. …
How to Remove the Front Seats of the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. the driver's seat, of the Mercedes A-Class. First, open the front door and start unscrewing the mounting bolts found on the front seat tracks;.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos