|
Do it yourself
| |||
| ||||
How to change oil and filters on a Mercedes Sprinter 2.5 W906
Model: Mercedes Sprinter
MK 2, W906
- Years 2006-2018
Changing the oil on the Sprinter W906 3.0 V6 is straightforward. Start by unscrewing the filler cap and removing the oil filter (located under the airbox) to facilitate draining. Lift the vehicle, place a large container underneath, and unscrew the drain plug with a 13mm socket. Replace the copper washer and tighten the plug to 30 Nm. The oil filter is a cartridge: unscrew the cover with the appropriate tool, replace the cartridge and the two O-rings (lubricate them with oil). Tighten to 25 Nm. Refit the airbox and top up with 12 litres of 5W30 oil (check the level with the dipstick). The service reset is done from the dashboard: key in position 2, hold the "O" button for 20 seconds until you hear a beep, then navigate with "M" to "Reset" and confirm. The recommended interval is 8,000 km to preserve the engine. Remember to dispose of used oil and filters properly at an authorised centre.
Posted on 22 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Mercedes Sprinter
(2006-2018 /
MK 2, W906)
If the remote for your Mercedes Sprinter W906 has suddenly stopped working and you want to find out the steps to complete the battery replacement, th…
Mercedes Sprinter
(2006-2018 /
MK 2, W906)
In this video, you can see how to check the engine oil status on a Mercedes Sprinter W906. You will not check it using the usual dipstick from the en…
Mercedes Sprinter
(2006-2018 /
MK 2, W906)
In this video we can see how to reset the service of a Mercedes Sprinter W906: make sure that the trunk and hood are properly closed, then turn on th…
Other guides you may be interested in
|
How to Replace the External Wing Mirror on a Ford C MAX
In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.135
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |