|
Do it yourself
| |||
| ||||
Full Service Instructions
Model: Mercedes Sprinter
MK 2, W906
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
This video is currently unavailable
During the routine service, it is good practice to carry out a series of checks that are often overlooked. Once the vehicle is raised on the lift, inspect the pipes, wiring, hoses, rubber mounts, exhaust pipe, any play, brake wear, and the integrity of the underbody in general. Then proceed with the actual maintenance by replacing the engine oil (drain plug located on the side of the oil sump), oil filter (cartridge type, accessible from the engine bay), cabin air filter (located under the windscreen), diesel filter (move the sensor from the old to the new filter), and engine air filter. Finally, reset the service light using the diagnostic tool.
Updated on 11 February 2026 by ScegliAuto
Related tutorials
Mercedes Sprinter
(2018-2026 /
Br907, Br910, MK 3)
This article shows how to reset the service light on the 2021 Mercedes Sprinter. It is advisable to perform the reset procedure only after having the…
Mercedes Sprinter
(2018-2026 /
Br907, Br910, MK 3)
In today's article, we will explain the procedure for resetting the service light on the Mercedes Sprinter. This procedure takes little time to compl…
Mercedes Sprinter
(2006-2018 /
MK 2, W906)
To perform the service reset, use the controls on the left side of the vehicle. Once the instrument cluster is powered on, press the button on the ri…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.109
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |