Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Oil Level in a Mercedes Sprinter W906

Model: Mercedes Sprinter MK 2, W906 - Years 2006-2018
Part: Engine oil

In this video, you can see how to check the engine oil status on a Mercedes Sprinter W906. You will not check it using the usual dipstick from the engine bay (this dipstick exists, but it is for professionals only), but through the vehicle's display. Turn on the ignition and then press the button located on the left above the speedometer, which has an "M" on it. Hold it for a few seconds until the oil icon appears on the left. At the same time, flashing lines will appear until "ok" shows up, confirming that the level is fine, or an error message will indicate that you need to check the level.

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change oil and filters on a Mercedes Sprinter 2.5 W906
How to change oil and filters on a Mercedes Sprinter 2.5 W906
Mercedes Sprinter (2006-2018 / MK 2, W906) Changing the oil on the Sprinter W906 3.0 V6 is straightforward. Start by unscrewing the filler cap and removing the oil filter (located under the ai…
How to Check the AdBlue Level in a Mercedes Sprinter
How to Check the AdBlue Level in a Mercedes Sprinter
Mercedes Sprinter (2018-2026 / MK 3, Br910, Br907) In this brief guide, we will discover the instructions that will allow you to check the AdBlue level in a Mercedes Sprinter. First, get in the vehicl…
How to check the cooling system of the Mercedes Sprinter
How to check the cooling system of the Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) In this video, we will see how to check the cooling system of the Mercedes Sprinter. The tank is located on the passenger side, inside the engine com…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos