Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Use the Heating Controls of the Mercedes GLC

Model: Mercedes Glc C253, X253, MK 1 - Years 2015-2022

Below are the instructions for using the heating controls of the Mercedes GLC. First, get in the vehicle and turn on the instrument cluster and the engine; then press the appropriate button to turn on the cabin heating, adjusting the hot/cold temperature using the button located to the left of the controls, as shown in the video. At this point, set the direction of the airflow, adjusting it to multiple settings if needed, and activate the automatic climate control if available.

Posted on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Mercedes GLC remote control?
Mercedes Glc (2015-2022 / C253, X253, MK 1) To replace the battery of the Mercedes GLC remote control, you need to remove the key from the bottom of the device, so that it can be used to pry: y…
How to Reset the Service on a Mercedes GLC
How to Reset the Service on a Mercedes GLC
Mercedes Glc (2022-2026 / C254, X254, MK 2) On the Mercedes-Benz GLC, the oil change warning reset is performed entirely from the driver's seat, using the steering wheel controls and the centra…
How to Reset the Service Light on a Mercedes GLC
How to Reset the Service Light on a Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) To reset the service light on a Mercedes GLC, get in the car and turn on the instrument cluster without starting the engine. Use the controls on the …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos