Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Replace the headlight control unit on Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Control unit
Operation: Replace the headlight control unit on Mercedes C-Class

Replace a headlight control unit on a Mercedes C-Class? Let's see how to proceed with the disassembly in the video tutorial. We open the bonnet by pulling the bonnet opening lever and put it in safety. With a cordless screwdriver or screwdriver we unscrew the locking pins located in the upper part of the bumper. Once you have unscrewed the screws in the upper part, unscrew the pins of the stone guards and finally remove the pins located in the lower part of the bumper. We remove the bumper from the car body by hand. We detach the headlight from the car body (we disconnect the power supply terminal). We unscrew the control unit located above the lighthouse. Finally we reassemble the front bumper with the headlight and tighten the pins. We test the correct functioning of the lights.


Posted on 27 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe C 2000-2007 - What to do when there is a problem with the ESP control unit on the Mercedes C-Class w203? Read Answer
    • Classe C 2000-2007 - Where is the Mercedes C-Class airbag control unit located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos