Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Instrument Cluster on a Mercedes C180

Model: Mercedes Clk A208, W208, C208 - Years 1997-2003
Part: Instrument cluster

Removing the instrument cluster from the central console of this vehicle is a bit of a lengthy job, so take your time to carefully analyse this video and successfully complete the operation. You need to remove a good portion of the lower central dashboard plastics following the order shown. Disconnect all connectors, taking care to mark their positions for easier reassembly; we strongly recommend doing this. Be careful to remove every single screw during the disassembly of the central tunnel, the positions of which are shown with due attention.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Instrument Cluster on Mercedes CLK
Removing the Instrument Cluster on Mercedes CLK
Mercedes Clk (2002-2010 / W209, A209, C209) Want to remove the instrument cluster from a Mercedes CLK? Here's how to take out the piece from the Mercedes dashboard. Use hook levers to detach an…
How to Remove the Instrument Cluster on a Mercedes CLK
How to Remove the Instrument Cluster on a Mercedes CLK
Mercedes Clk (2002-2010 / W209, A209, C209) Want to remove the instrument cluster from a Mercedes CLK? Here’s how to take the instrument panel out from the dashboard. Use a lever to remove the …
Removing the Glove Compartment on a Mercedes CLK
Removing the Glove Compartment on a Mercedes CLK
Mercedes Clk (1997-2003 / A208, W208, C208) Let's see how to remove the glove compartment located in the dashboard of a Mercedes CLK. Open the glove compartment and remove the screw covers insi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos