Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Filter on a Mercedes Citan

Model: Mercedes Citan MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Cabin air filter

See other generations:
Video tutorial

Replace the cabin air filter on a Mercedes Citan. Remove all the covering plastics to access the filter located under the dashboard.

Disconnect the trim in the centre of the dashboard (radio frame). Remove the gear knob with the attached trim.

Take off the side plastics of the right central tunnel and the glove compartment. Once all the plastics are removed, unscrew the cover of the air filter.

Replace the air filter with a new one. Refit the filter cover, the glove compartment, and all the dashboard covering plastics.


Updated on 29 March 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter in the Mercedes Citan Van?
How to Replace the Cabin Filter in the Mercedes Citan Van?
Mercedes Citan (2012-2020 / MK 1) In this tutorial, see how to replace the cabin filter in the Mercedes Citan van, a very simple and quick operation. First, position yourself on the p…
How to Reset the "Service" Light on a Mercedes Citan
How to Reset the "Service" Light on a Mercedes Citan
Mercedes Citan (2012-2020 / MK 1) This procedure must be performed after the service has been completed. Before you start, activate the instrument cluster of your Mercedes Citan by tu…
Where is the cabin filter located in the Mercedes Citan van?
Where is the cabin filter located in the Mercedes Citan van?
Mercedes Citan (2012-2020 / MK 1) In this video, you can see where the cabin filter is located in the Mercedes Citan van and how to proceed if you need to replace it. As shown, it is …

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos