Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Removing the Mercedes C-Class crankshaft sensor

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Crankshaft RPM sensor
Operation: Removing the Mercedes C-Class crankshaft sensor

In this video tutorial we will see the main instructions to be able to disassemble the crankshaft speed sensor of a Mercedes C-Class. First we open the engine hood and remove the intake hoses: then we remove the plastic protection of the engine and go removing the sensor bracket bolts; disconnect it from its electrical connector and extract it, as shown in the video. We reassemble the new spare part and then all the previously disassembled components; check the trend of the engine revolutions, if it works and are correct.


Posted on 27 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2007-2013 - Where is the crankshaft position sensor located in the Mercedes C-Class W204? Read Answer
    • Classe C 2000-2007 - Where is the crankshaft rpm sensor located on the Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos