Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to replace the crankshaft speed sensor on a Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Crankshaft RPM sensor
Operation: How to replace the crankshaft speed sensor on a Mercedes C-Class

Let's see together how to best remove and replace the crankshaft rpm sensor on a Mercedes C-Class. We open the bonnet, lift and secure it. Remove the plastic soundproofing panel, then, remove the sensor power supply clamp (located on the engine head) with your fingers, remove the locking pin located on the rpm sensor with a socket wrench. After removing the damaged sensor, let's replace it with a new piece equal to the original. We test the correct functioning of the sensor with the ignition of the car.


Posted on 1 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe C 2007-2013 - Where is the crankshaft position sensor located in the Mercedes C-Class W204? Read Answer
    • Classe C 2000-2007 - Where is the crankshaft rpm sensor located on the Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos