Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Sprinter
    4. : Removing the headlight bulbs on the Sprinter

Mercedes Sprinter - Video tutorial

Model: Mercedes Sprinter MK 1, W901 - Years 1995-2006
Part: Headlight bulb
Operation: Removing the headlight bulbs on the Sprinter

Do we want to replace the headlight bulbs? Let's see how the bulbs of the Mercedes Sprinter are changed. Let's lift the front hood of the car, let's secure it. We remove the cover placed behind the headlight. Once the cover behind the headlight has been completely removed, we just have to disconnect the electrical terminal and remove the damaged bulbs. We replace the bulbs inside the headlight (always suitable type and size): we block the bulb in the lamp holder and connect the electrical clamp behind it. We turn on the instrument panel and test the operation of the bulbs we replaced. We close the engine compartment at the end of assembly.


Posted on 1 January 2024 by ScegliAuto

This video is currently unavailable

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos