Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Battery from a Mercedes S-Class

Model: Mercedes Classe S W221, MK 5 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Battery

See other generations:
Video tutorial

Before you can start, open the trunk of your Mercedes S-Class. Begin by unscrewing and removing the screws that secure the lower cover of the cargo area, then remove the cover itself.

After that, remove all the retaining clips that hold the battery cover in place, and then take off the cover. This will give you access to the dead battery.

Next, loosen the bolts that secure the two terminals connected to the battery, and then disconnect them. At this point, remove the bracket that holds the battery in place by unscrewing the corresponding bolts.

Once you complete this step, you can remove the battery, and you will have finished the disassembly.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Where is the Auxiliary Battery Located in a Mercedes S-Class?
Where is the Auxiliary Battery Located in a Mercedes S-Class?
Mercedes Classe S (2005-2013 / W221, MK 5) .. the auxiliary battery is located in a Mercedes S-Class, useful in case you need to replace or simply recharge it. As shown, the battery is positioned.. …
Battery Replacement on Mercedes S-Class
Battery Replacement on Mercedes S-Class
Mercedes Classe S (2013-2020 / MK 6, W222) .. The battery on the Mercedes S-Class is located in the bottom of the trunk. Remove the two screws that secure the carpet and pull it.. …
Replacing Battery in Mercedes S-Class
Replacing Battery in Mercedes S-Class
Mercedes Classe S (2005-2013 / W221, MK 5) .. On the Mercedes S-Class W221, the battery is not located under the hood, but in the compartment behind the rear seats... …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos